Blocked Drains York

Are you experiencing a blocked drain in your home in York? Don't worry, we're here to help. At Blocked Drains York, we understand the frustration and inconvenience caused by a blocked drain. In this article, we'll guide you through the process of using rods to unblock a drain, a simple and effective method that can save you time and money.

Before you start, it's essential to understand the nature of the blockage. If you notice that water is not draining properly, or if you hear gurgling sounds from the drain, it's likely that there's a blockage somewhere in the drainage system. The blockage could be caused by a buildup of debris, grease, or other substances that have accumulated over time.

To unblock a drain using rods, you'll need a few basic tools:

• A drain rod (also known as an auger)
• A pair of gloves
• A bucket or container to catch any water that may spill out

Identify the location of the blockage by checking the drain outside your home. If you have a drain cover or grate, remove it to access the drain. If you're not sure where the blockage is, you can use a CCTV survey to locate it.

Insert the drain rod into the drain, feeding it through the pipe until you feel resistance. This is usually where the blockage is located.

Turn the rod clockwise to break up the blockage. You may need to apply some force, but be careful not to push too hard, as this can damage the pipe.

Once you've broken up the blockage, use the rod to pull it out of the pipe. You may need to repeat this process several times to remove all of the debris.

After removing the blockage, check the drain to make sure it's flowing freely. Run some water through the drain to test it.